Weider WESY96400 user manual not completely tighten the Nylon Locknut

CABLE ASSEMBLY

29. Attach the end of the Low Cable (23) to the	29
Long “U”-Bracket (57) with a 1/4” Nylon
Locknut (2) and a 1/4” Flat Washer (10). Do
not completely tighten the Nylon Locknut.
It should be threaded onto the end of the
Cable so only a couple of threads are				57
showing above the Nylon Locknut, as			2
shown in the inset drawing.
		2	10
		10		23
	23	57
30. Attach the High Cable (58) to a Small “U”-	30
Bracket (71) with a 1/4” Nylon Locknut (2) and
a 1/4” Flat Washer (10). Do not completely
tighten the Nylon Locknut. It should be
threaded onto the end of the Cable only a
couple of turns, as shown in the inset
drawing.		58
Attach the Small “U”-Bracket (71) to the indi-
cated Weight Tube (63) with a 5/16” x 1 3/4”
Bolt (24) and a 5/16” Nylon Locknut (3).
		3		24
		71
		63
				10
	71	58		2
		10
		2
31. Locate the Military Press Cable (72). Attach	31			72
the Military Press Cable to the other Small
		3
“U”-Bracket (71) with a 1/4” Nylon Locknut (2)
and a 1/4” Flat Washer (10). Do not com-				71
pletely tighten the Nylon Locknut. It
should be threaded onto the end of the				24
Cable only a couple of turns, as shown in		63
the inset drawing.				10
		72
Attach the Small “U”-Bracket (71) to the indi-	71
				2
cated Weight Tube (63) with a 5/16” x 1 3/4”		10
Bolt (24) and a 5/16” Nylon Locknut (3).
		2

15