CH MEMORY ANALOG CLOCK/TIMER
AUTO MEMORY
SEARCH/SKIP
MEMORY ADD ¥ERASE
TV/CATV
TV 07

Manually Searching for and Storing Channels

CABLE TV (CATV) OPERATION

1.Press the MENU button to turn on the pop-up menu. Press the MENU button again to select

CH MEMORY.

2.Press the + or Ð button to move the arrow to SEARCH/SKIP. Select SEARCH/SKIP by press- ing the MENU button.

3.Press the Ð button to se- lect the SEARCH mode. The TV will return to the normal screen after four seconds.

CH MEMORY ANALOG CLOCK/TIMER

AUTO MEMORY SEARCH/SKIP

MEMORY ADD ¥ERASE

TV/CATV

CHANNEL UP/DOWN

SKIP

:

[ + ]

SEARCH

:

[ Ð ]

In addition to normal broadcast reception, the TV is equipped to receive up to 125 cable channels (113 and 12 TV channels). To use the TV with a cable TV sys- tem, following the steps below.

1. Press the MENU button to turn on the pop up menu. Press the MENU button again to select CH MEMORY.

2. Press the + or Ð button to move the arrow to TV/CATV. Select TV/CATV by pressing the MENU button.

4.Press the CHANNEL or button to start search- ing. It will stop whenever an available channel is found.

5.If you do not want to store the channel in memory, press the CHANNEL or button again. To store the channel in memory, refer to ADDING CHAN- NELS at the left.

6.Until all desired channels have been stored, return to SEARCH/SKIP as described above and press the + button to return to the SKIP mode.

3. Press the MENU button to cycle through the four channel modes: (1) TV;

(2)STD (Standard) for cable TV mode; (3) HRC (Harmonic Related Carrier) for cable TV sub- scriber; (4) IRC (Incre-

mental Related Carrier) for cable TV subscriber.

Once the appropriate cable TV mode is selected, the screen will return to normal after two seconds. Note: Consult your cable company if you are not sure which system you are using, or try different systems to obtain the maximum number of channels.

To toggle between the TV mode and the cable TV mode, press the TV/CATV button on the TV.

To memorize cable TV channels, refer to CHANNEL PROGRAMMING on page 14.

CATV Channel Reference Table

Use the table below to find which CATV channel your TV is displaying. The top row (in bold) represents the channel number shown on the TV screen; the bottom row represents the corresponding CATV channel.

1, 2 . . . . 6 . . . . 13, 14 . . . . 26 . . . . 36, 37 . . . . 50 . . . . 65,

5A, 2 . . . . 6 . . . . 13, A . . . . M . . . . W, W+1 . . W+14 . .W+29,

66 . . . . 75 . . . . 86 . . . . 94, 95 . . . . 99, 100 . . . . 112 . . . . 125

W+30 ..W+39 . . W+50 . . W+58, A-5 . . A-1, W+59 . . W+71 . . W+84

15

Page 15
Image 15
Weslo WLTL62790 Manually Searching for and Storing Channels, Cable TV Catv Operation, Catv Channel Reference Table