West Bend L5762, 41200CF instruction manual CONTROL PANEL and FUNCTIONS

CONTROL PANEL and FUNCTIONS

LCD DISPLAY: The display indicates when the appliance is ready for use. When the unit is first plugged in the default program is displayed. “1 3:25” appears on the display. The “1”specifies which program is selected (1-12 programs) and the “3:25” is the length of the program in hour:minutes. The position of the marking at the top of the display indicates the weight of the loaf selected (1, 1-1/2 or 2lb) with 2lb as the default. The position of the marking at the bottom of the display indicates the degree of browning that is selected (light, medium, dark or rapid) with medium as the default. As the program proceeds the digits of the time displayed will decrease progressively indicating remaining time. During operation the status of the program is indicated in the display with a mark at the active program mode; “Timer,” “Preheating,” “Kneading,” “Pause,” “Rising,” “Baking,” “Keep Warm,” and program “End.”

“START/STOP” Button: The “START/STOP” button is used to start, stop, pause or cancel a program. Pressing the button when the bread maker is idle will start the program. Pressing the button when the bread maker is active will pause the program. Pressing the button while the program is paused will resume the program. When the bread maker is active or paused, pressing and holding the button until a short alert is heard will cancel the program. A short alert is heard with each press of the “START/STOP” button. You must set all your desired program settings before starting the program. The program cannot be changed while the bread maker is active.

UP and DOWN “TIMER” Buttons: The “TIMER” buttons are used to set a delayed

program end time. Only the following programs can be used with the delay timer: (1) “BASIC,” (2) “FRENH,” (3) “WHOLEWHEAT,” (4) “SWEET,” (8) “DARK,” (9) “DOUGH” and (10) “BAGEL DOUGH.” The (5) “SUPER RAPID 1.5lb,” (6) “SUPER RAPID 2lb,” (7) “QUICK,” (11) “JAM” and (12) “BAKE” programs can not be started with the delay timer. The delay hours and minutes will be added to the preprogrammed times for the specific program. The time indicated in the display is the time until the end of the cycle. The maximum time delay is 12 hours and 58 minutes per program.

Example: It is 8:30 p.m. and you would like the bread ready for the next morning at 7:00 a.m. Determine the time difference, 7:00 a.m. is 10 hours and 30 minutes ahead of 8:30 p.m. Press the “TIMER” up or down button until 10:30 appears in the display.

NEVER use the time delay function when using perishable ingredients such as milk, eggs, fruit, yogurt, etc.!

4