West Bend PBL1000, L5746 Cleaning Your Blender, Lever Cap Spring Stopper Pin Stopper Valve Body

Models: L5746 PBL1000

1 44
Download 44 pages 862 b
Page 8
Image 8
CLEANING YOUR BLENDER

CLEANING YOUR BLENDER

Before using your ChefscapeBlender for the first time and after each use, be sure to thoroughly wash the blending jar, blender blade base, smoothie blade base, dispensing valve, lid and stir stick. To prolong the life of your ChefscapeBlender, do not wash plastic parts in the dishwasher. Open the dispensing valve while washing to rinse out the valve. After each use, unscrew and disassemble the dispensing valve for cleaning (see instructions below).

Lever

Cap

Spring

Stopper Pin

Stopper

Valve Body

1.Remove the valve from the smoothie blade base by unscrewing the entire valve counter-clockwise.

2.Remove the cap from the valve body by unscrewing it counter-clockwise.

3.Squeeze cap and stopper together and slide the lever off the stopper pin.

4.Remove the spring.

5.Remove the stopper and stopper pin by pulling the rubber rim of the stopper. The stopper and pin are tightly fit and need not be separated.

6.Clean all parts in warm, soapy water, allow to dry thoroughly and reassemble in the order shown.

8

Page 8
Image 8
West Bend PBL1000, L5746 instruction manual Cleaning Your Blender, Lever Cap Spring Stopper Pin Stopper Valve Body