Westell Technologies 2110 Installation Information, Installation Requirements, Package Contents

User Guide WireSpeed Dual Connect Modem

5.INSTALLATION INFORMATION

5.1Installation Requirements

To install the Westell Dual Connect modem, you will need the following:

1.An Ethernet adapter installed in your PC or a USB adapter installed in your PC.

2.A DSL-ready line (provided by your Service Provider).

5.2Package Contents

•WireSpeed Dual Connect Modem

•Power Supply

•RJ-45 Ethernet cable (straight-through)

•USB cable

•RJ-11 DSL Phone cable

•Westell CD-ROM containing USB software drivers and User Guide in .PDF format

•Quick Start Guide

5.3Microfilters

ADSL signals must be blocked from reaching each telephone, answering machine, fax machine, computer modem or any similar conventional device. Failure to do so may degrade telephone voice quality and ADSL performance. Install a microfilter if you desire to use the DSL-equipped line jack for telephone, answering machine, fax machine or other telephone device connections. Microfilter installation requires no tools or telephone rewiring. Just unplug the telephone device from the baseboard or wall mount and snap in a microfilter, next snap in the telephone device. Contact Westell to obtain a microfilter kit, which contains multiple microfilters for your installation.

5.4LED Indicators

The LED indicators are used to verify the unit’s operation and status. LED states are described in Table 1.

Table 1. LED States and Descriptions

	LED	State	Description
	POWER	Solid Green	Power ON
		No Light	No Power
		Slow Flashing Green	Power ON and passed power-up diagnostics
			(1 flash/sec)
		Moderate Flashing Green	Power ON and attempting synchronization
	READY		(2 flashes/sec)
		Steady Green	Power ON and synchronized with ADSL line card
		Steady Red (less than 20 sec.)	Hardware power-up in process
		Blinking Red	Unit failed power-up diagnostic
		Alternating Red/Green	Modem diagnostic failed
		No Light	No Power
	ETHERNET	Solid Green	Ethernet link established
		Flashing Green	Transmit or Receive Activity
		No Light	No link established
	USB	Solid Green	USB link established
		Flashing Green	Transmit or Receive Activity
		No Light	No USB Activity
030-300196 Rev. A			4