If dryers do not
operate properly...
Check the followlng to be sure that:
1.Electrical supply is connected.
2.Circuit breakers are not tripped or fuses blown.
3.Doors are closed.
4.Timer has been actuated.
5.Controls are set in a running or “ON” position,
6.Gas shutoff valves are open both on dryer and supply Ilne.
Move dryers to a
new location...
Before movlng dryers across tloor, slide dryers onto cardboard or hardboard to protect tloor coverlng.
l Shut off electrical supply to dryers.
l Disconnect power supply cords and tape securely to dryer.
l Shut off the gas supply valves in the gas supply line.
l Disconnect gas pipe and fittings from dryer and cap the gas supply line. Tape end of dryer gas pipes.
l Tape the drums to the front panel. l Tape doors to cabinet.
l Adjust leveling legs all the way in.
Before installing dryers in a new location, check with your gas supplier or dealer to see that your dryer is equipped with the correct burner for the particular type of gas in your new building. Burner informatlon may be found on the model/serial rating plate in the door well of the dryer.
Page 11
