Wlndow opening frame -
Knurled
I I knob
Personal Injury Hazard
l Because this air conditioner weighs about 70 to 75 pounds, it is recommended that you have someone help you tnstall your new unit and that you both use proper lift- ing techniques.
l This appliance must be installed according to all applicable codes and ordinances.
l Handle the air conditioner with care. Watch out for the sharp metal fins on the front and rear coils.
l Do not use the collected water for drinking purposes. It is not sanitary.
Failure to follow the above precautions could result in personal injury.
1.Unpack mounting parts before installing your air conditioner. Be sure you have all the nec- essary parts (see top two diagrams at left). This air conditioner will fit most steel casement windows. A normal installation can be made with a screw- driver, %6” socket driver, tape measure and drill.
Description of parts (top hvo diagrams at left) 1 #lO x W long s.m. screw
2 #
4 Knurled knob screw
5 Top mounting bracket
NOTE: Above parts (not shipped loose) installed on unit by factory.
2.Pick the right window. First, decide what room(s) you want to cool. Then choose a window that will allow the
To be able to use the window mounting parts shown in the diagram to the left of Step 1 above, the window should have a minimum width of 14%” and a maximum width of 16” (see “A”in bottom diagram). The window should have a minimum height of 10%” and a maximum height of 11%” (see “B”in bottom diagram).
3.Remove the glass from the frame opening selected. Clear away any hardened putty.
4.Before sliding unit through the casement opening, remove the bottom window bracket (Item 3) on both sides of the unit. NOTE: Only the top screws (Item 1) need to be removed.
9
