Butt to bottom
of flller frame. cut off axcess
length below unlt.
Seal strip
11.Peel backing from seal strip (Item 8) and press it onto side filler frame guides on each side of unit.
12.Place unit in wlndow by resting unit on shelf. Push unit toward window so side angles are sealing against the side jamb stop (see diagram). Slide the opened window sash firmly to make cer- tain the frame and unit sealing strips are sealing.
13.Using Ye” drill, install locking screws (Item 7). Use two screws in top jamb and in the side bottom flanges. If you need additional holding strength, add two more screws at upper sides of filler frame (marked ‘A”). Also, two screws can be added at unit sides (marked “B”). However, if yqu add screws at “B:’you must use a %6” drill bit to predrill through the plastic sides of air conditioner.
14.Lock the sllding sash at bottom using lock bracket (Item 10) and screw (Item 7) as shown in diagram at left. Use a ‘/a” drill bit to drill through track before inserting screw.
15.Cut seal strip (Item 11) to length. Install it between space of opened sash and glass of the closed sash (see diagram).
