OperatingInstructions
Startingyourair conditioner
1. Set exhaust control (if your unit is so equipped) to CLOSED for maximum cooling.
LModels
ACSSOZXT ACSSO2XV ACSlO2XT
2.Choose either LO COOL or HI COOL fan speed setting.
LO COOL | . . . | . . . for sleeping | comfort |
HI COOL . . | . | . . for maximum | cooling |
FAN ONLY | . . . . . | . . . for circulating | room air |
|
| when no cooling is desired |
Ifyou turn your air conditioner off, wait at least two minutes before turning it back on or you may blow a fuse.
I
Model ACC602XT
3.mm the thermostat control to number 6
Lower the number setting for less cooling. You will need to experiment to find the setting which suits you best.
EXHAUST
Fan
Openonly
CLOSED UN17OFF
(J)2:&
OPENLOCOOL
EXHAUST
Fan
Closedonly
Figure A | Figure B |
Theexhaustcontrol
The exhaust control setting draws stale or smoky air from the room.
1. To exhaust room air
Set exhaust control to OPEN. Adjust fan control
to speed desired. If no cooling is desired, use FAN ONLY setting.
2. To circulate room air
Set exhaust control to CLOSED. Adjust fan control to FAN ONLY
Changingair direction
The louvers in the grille area at the top of the air conditioner control the direction of the cooled air.
If your unit looks like Figure A, move
the lever at the top of the grille to the right, left or straight ahead. Simply move the lever in the direction you want the air to go. The rear vertical louvers in the grille can be adjusted left, right or straight ahead. The front set is fixed and directed upward.
If your unit looks like Figure B, turn the circular air discharge grilles on top of the unit Both grilles can be adjusted to the right or left, or ad- justed individually.
11