Whirlpool CA10WXP0 manual Starting Your Air Conditioner - Rotary Control, To raise the temperature

To select the fan speed (in Cool or Power Saver mode only):

Press TURBO, HIGH or LOW.

Turbo

High

FAN

SPEED

Low

To raise the temperature:

Press the up arrow button to raise the temperature 1º until it reaches 86°F (30ºC).

To lower the temperature:

Press the down arrow button to lower the temperature 1º until it reaches 64°F (18ºC).

Starting Your Air Conditioner —

Rotary Control

Model 1

Model 2

To set Timer for a 1- to 24-hour delay until air conditioner turns off (the air conditioner must be On):

1.Press TIMER. Indicator light on air conditioner will flash.

Timer

2.Press the up arrow or down arrow button to change delay time (1 to 24 hours).

3.Press TIMER again or wait 10 seconds. Indicator light on air conditioner will remain on.

To set Timer to turn on air conditioner, keeping previous settings:

1.Turn off air conditioner.

2.Press TIMER. Indicator light on air conditioner will flash.

3.Press the up arrow or down arrow button to change delay time (1 to 24 hours).

4.Press TIMER again or wait 10 seconds. Indicator light on air conditioner will remain on.

To set Timer to turn on air conditioner, changing the previous settings:

1.Turn on air conditioner.

2.Adjust MODE to Auto, Cool, Fan Only, or Power Saver.

3.Adjust FAN SPEED to Turbo, High or Low.

4.Adjust temperature between 64°F (18ºC) and 86°F (30ºC).

5.Wait 3 seconds before turning off air conditioner.

6.Press TIMER. Indicator light on air conditioner will flash.

7.Press the up arrow or down arrow button to change delay time (1 to 24 hours).

8.Press TIMER again or wait 10 seconds. Indicator light on air conditioner will remain on.

1.Remove clear protective film from front panel badge (on some models).

2.Set exhaust control. See “Exhaust Control (on some models).”

3.Select the fan speed. See “Fan Speed.”

4.Select temperature. See “Temperature.”

Exhaust Control (on some models)

Push the Exhaust control CLOSED for maximum continuous cooling. Pull the Exhaust control OPEN to allow you to draw stale or smoky air from the room.

■Open - pull to exhaust room air to the outside

■Closed - push to circulate room air

NOTE: The Exhaust control will function only when the Fan Speed control is operating.

10