Top view
2
1
3
1.Side curtain against window channel
2.Window channel
3.#8 x ³⁄₄ in.
3.Check that air conditioner cabinet is tilted to the outside so that water will run to the outside. If cabinet is not properly positioned, reposition or shim cabinet to provide the proper tilt.
4.Use a ³⁄₃₂ in. drill bit to drill starter holes through the holes in the top channel into the window sash.
5.Attach top channel to the window with 2 - #8 x ³⁄₄ in. round- head screws.
1
1. #8 x ³⁄₄ in.
Complete Installation
1.Place
2.Use a ³⁄₃₂ in. drill bit to drill a starter hole through the hole in the bracket into the window sash.
3.Attach
1
2
1.Upper window sash
2.
4.Insert foam seal behind the top of the lower window sash and against the glass of the upper window.
1
2
1.Lower window sash
2.Foam seal
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
5.Plug into a grounded 3 prong outlet.
7