Whirlpool CA10WXP0 manual Position the Air Conditioner, Attach side curtains to window

6.Extend right-hand curtain outward so you may insert the first screw through the middle hole of the curtain. Using a #8 x ³⁄₈ in. pan-head screw, screw curtain to middle hole in air conditioner cabinet.

NOTE: This screw is required to correctly attach curtain (top to bottom) to the air conditioner cabinet.

1

1.#8 x ³⁄₈ in. pan-head screw

7.While the right-hand curtain is still extended, insert screws into top and bottom slots of curtain. Using #8 x ³⁄₈ in. pan- head screws, screw curtain to the top and bottom holes in air conditioner cabinet.

8.Slide curtain housing into guides as far as it will go.

9.Repeat above steps for left-hand curtain.

Position the Air Conditioner

■Handle air conditioner with care.

■Be sure your air conditioner does not fall out of the opening during installation or removal.

■The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a grounded outlet.

■Do not block the louvers on the front panel.

■Do not block the louvers on the outside of the air conditioner.

WARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

1.Center air conditioner in window. Check that feet on bottom of air conditioner are behind and against back side of windowsill. Lower window sash to hold cabinet in place.

1

2

1.Window sash

2.Feet on bottom of air conditioner behind back side of windowsill

2.Pull left-hand curtain frame out until it fits into the window channel. Repeat with right-hand curtain frame.

Attach side curtains to window

1.Insert one of the #8 x ³⁄₄ in. round-head screws through left- hand curtain frame and into the window channel to fasten the curtain frame to the window.

2.Repeat for right-hand curtain frame.

Front view

1

2

1.Hole for #8 x ³⁄₄ in. round-head screw

2.Side curtain

6