Whirlpool CA10WXP0 manual Changing Air Direction, Normal Sounds, Fan Speed, Temperature, Model

Fan Speed

Set FAN SPEED to the desired setting. When the air conditioner is operating at Low Cool, High Cool, or Turbo Cool, the fan circulates air continuously.

■Turbo Cool - for maximum cooling

■High Cool - for normal cooling

■Low Cool - for sleeping comfort

■Fan Only - to move air continuously without cooling NOTE: Fan runs on Turbo speed only.

■Power Saver (on some models) - fan runs only when cooling is needed. Fan stops circulating air when the room temperature matches the Temperature control setting.

Because the fan does not circulate the room air continuously, less energy is used, but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.

Model 1

Changing Air Direction

Roll the wheel to direct the air right or left. Rotate the whole cartridge to direct air up, down or straight ahead.

1

1. Wheel

1

	1. Cartridge
	Normal Sounds
	When your air conditioner is operating normally, you may hear
	sounds such as:
Model 2	■ Droplets of water hitting the condenser, causing a pinging or
	clicking sound. The water droplets help cool the condenser.
	■ Air movement from the fan.
	■ Clicks from the thermostat cycle.
	■ Vibrations or noise due to poor wall or window construction.
	■ A high-pitched hum or pulsating noise caused by the modern
	high-efficiency compressor cycling on and off.

Temperature

Turn the TEMPERATURE control to a mid-setting. Adjust the air conditioner's performance by turning the Temperature control clockwise for maximum cooling. For less cooling, turn the TEMPERATURE control counterclockwise. Experiment to find the setting that suits you best.

11