Whirlpool MT9160XE, MT6120XE installation instructions GROUNDINGlNSTRUCllONS, iECllUCA1REQUIREMENTS

Models: MT6120XE MT9160XE

1 50
Download 50 pages 32.73 Kb
Page 6
Image 6
iECllUCA1REQUIREMENTS

iECllUCA1REQUIREMENTS

Observe all governing codes and ordinances.

A 120 Volt, 60 Hz, AC only, 15 amp fused electrical supply is required. (A time-delay fuse is recom- mended.) It is recommended that a separate circuit serving only this appliance be provided.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

,

GROUNDINGlNSTRUCllONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding can result in a risk of electric shock.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

For a permanently connected appliance:

This appliance must be connected to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment ground- ing terminal or lead on the appliance.

6

Page 6
Image 6
Whirlpool MT9160XE, MT6120XE installation instructions GROUNDINGlNSTRUCllONS, iECllUCA1REQUIREMENTS