Setting the clock
When the oven is first plugged in, the Display flashes “88:88”. If the eiectric power ever goes off, the Display will again flash all 6’s when the power comes back on.
You can cook without setting the clock, but the Display will not show the correct time of day after cooking. To set the correct time of day, follow these steps:
1.Touch STOP/CLEAR and the Display will show “1:OO”. Then touch AUTO START/ CLOCK and the Display will show a "0".
2.Touch Number Pads for the correct time of day. The Display will show the numbers you touched in the order you touched them. This example shows 25 minutes after 3 o’clock.
3.Touch AUTO START/CLOCK. The Clock is set.
If you have touched in an incorrect time, such as 12:65, “ERROR” will show on the Display. Touch STOP/CLEAR, then touch AUTO START/CLOCK and start over.
NOTE: To reset the clock, touch AUTO START/ CLOCK. A “0”will show on the Display. Continue to set the clock as shown above.
Using the Minute Timer
Your microwave oven can be used as a kitchen timer. Use the Minute Timer for timing up to 99 minutes, 99 seconds.
Touch Number Pads for the minutes and seconds you want. The Display will show the numbers you touched in the order you touched them. This example shows 3 minutes.
Touch TIMER/PAUSE. The Display will count down to show you how much time is left. During the countdown the oven will be dark and the fan will be off.
When the set time ends, a long tone will sound. “END” will flash on the Display. Touch STOP/CLEAR or open the oven door to clear the Display. The Display will then show the time of day.
NOTES:
l To see the time of day while the Minute Timer is counting down, touch AUTO START/CLOCK.
lIf you want to use other Command Pads while the Minute Timer is counting down, touch STOP/CLEAR to cancel the Minute Timer.
11
