NOTE: Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl gets discolored, some of your utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go into or around a utensil goes down and heats the reflector bowl. This extra heat can discolor it.
Cleaning the solid element surface units
Burn and Electrical Shock Hazard
Solid element surface units do not glow red when hot. Make sure all controls are OFF and the range is COOL before cleaning.
Failure to do so can result in burns or electrical shock.
1.Make sure all surface units are off and cool.
2.For best results, wipe off surface units with a damp sponge and soapy water after each use. Remove
NOTE: Make sure plastic scrubbing pad does not contain metal or abrasive particles. Do not use abrasive cleaners.
19
