I.----PROBLEM
I Venting
:results are not
:what you expected
:Cooking
f results are not
/what you i expected
,
I I
I
!
I
_, POSSIBLE CAUSE -
: Exhaust fan is not turned on. ; Vent filters are not clean or I are not in place.
!Vent duct or outside opening
1 is blocked.
; There is a draft in room
i where cooktop is installed. ; Meat is not well trimmed.
~ The cooktop is not level.
/
!The recipe has never been i tested or is not from a
/ reliable source.
:The pan used is not the type I or size recommended in the 1 recipe.
j Cooking utensil does not fit ) the surface unit being used.
---~ SOLUTION
Turn on exhaust fan.
See page 2.5 for cleaning and re- placement instructions.
Unblock vent duct or outside opening.
Close door or window causing draft.
Trim off all meat fat.
Level cooktop. (See Installation Instructions.)
Use only tested recipes from a reliable source.
Refer to a reliable cookbook for recommended pan type and size.
Pan should be the same size or slightly larger than surface unit being used.
28