Pans should be the same size or larger than the elements to prevent boilovers and hot handles. Only use pans wllh fluI bottoms. Flat bottoms allow maximum contact between the pans and the elements for fast, even cooking. Pans with uneven bottoms or raised patterns on the bottom are not suitable. Flatness of a pan can be checked by placing an edge of a ruler across it.There should not be space between the ruler edge and the bottom of the pan. DO NOT USE trlvefs, woks wtlh skirts, or canners wlfh concave bottoms. See lllustmflons below.
Changing cooktop modules
The cooktop modules will work on either side of the cooktop. NOTE: The toll element module on the rlghf ride of the RC8920XRH cooktop Is not removable.
Coil element, solid element and smoothtop modules
NOTE: On the RC8920XRH cooktop, these opflonal modules will only fli In the lefl side.
To | remove, | lift slightly | 2. With both hands, | pull | 3. Lift out and set aside. | |
by | the handle. |
| module | toward | vou to |
|
1. To replace, | line | up the | 2. Push terminal into | place | 3. Lower the front with the |
terminal | with | the | until it’s plugged | in. | handle. |
receptacle. |
|
|
|
|
|
