Whirlpool RF3120XP manual Using your range, Using the surface units, Surface Unit Indicators

Using your range

OVENLIGHTSWITCH OVENSIGNALLIGHT

OVENTEMPERATURE	OVEN1	RIGHTREAR/	RIGHTFRONT\
CONTROL	SELECTOR	CONTROLKNOB	CONTROLKNOB

Using the surface units

4.	PUSHIN
	Turn to
1	Setting

.

Surface Unit Indicators

The solid dot in the surface unit indicator shows which surface unit is turned on bv that knob.

Control knobs must be pushed in before turning them to a setting They can be set any Iwhere between I4 and OFF.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.

Use HI to start		Use MED-HI			Use MED			Use MED-I.0
foods	cook-	to	hold	a	for gravy,			to keep	food
ing; to	bring	rapid		boil; to	puddings			cooking	after
liquids	to a	fry	chicken		and	icing;	to	starting	it
boil.		or	pancakes.		cook	large		on a higher
					amounts		of	setting.
					vegetables.

CAUTION: The use of the HI sefflng for long periods of time can damage surface units and discolor chrome reflector bowls. Start cooklng on HI and turn control down to con- tlnue tooklng.

Use LO to keep food warm until ready to serve. Set the heat higher or lower within the LO band to keep food at the temperature

1you want.

5