Whirlpool RF330PXX Storage Drawer, Removing the storage drawer, Replacing the storage drawer

The Storage Drawer

The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti-tip bracket.

Use care when handling the drawer.

Removing the storage drawer

1. Empty drawer of any pots and pans.before removing drawer. Pull drawer straight out to the first stop. Lift front and pull out to the second stop.

2.Lift back slightly and slide drawer all the way out.

Replacing the storage drawer

1. Fit ends of drawer sli~rails into the drawer guides on both sides of opening.

16

2. Lift drawer froxnd push in until metal stops on drawer slide rails clear white stops on drawer guides. Lift drawer front again to clear second stop and slide drawer closed.

To verity the anti-tip bracket is engaged:

l Remove the storage drawer.

lLook to see if the anti-tip bracket is attached to floor with screws.

l Make sure one rear leveling leg is positioned under the anti-tip bracket.

l See Installation Instructions for further details.