1.Make sure the Oven Temperature Control Knob is turned to the off position. Pull knob straight off and flip ii over.
2.Loosen the locking screws inside the control knob. Note the position of the notches.
3.To lower the temperature, hold knob handle firmly and move the tooth a notch counterclockwise. Each notch equals about 5°F (2.5%).
4.To raise the temperature, haid la~ob handle firmly and move the tooth a notch clockwise. Each notch equals about 5°F
(2.5%).
5.Tighten the locking screws and replace the control knob.
Broiling
1.Position the rack properly before turning on the oven. Position rack so that the surface of the food is at least 3 inches
(7.4 cm) away from the broil element. See “Broiling rack position chart” on page 14.
2.Put the broiler pan and food on the rack.
3.Close the door to the Broil Slop position (open about 4 inches (10.2 cm]). The door will stay open by itself.
4.Set the Oven Selector and Oven Tern- perature Control Knob to BROIL. The OVEN HEATING Indicator Light will come on.
NOTE: Do not preheat oven when broiling.
5.When broiling is done, turrl both the Oven Selector and Oven Ternperature Control Knob to OFF. The OVEN HEAT- ING Indicator Light will go ofl.
Locking Tooth Notches
screws\ /
13
