Whirlpool RF370PXY PROBLEM Control knobs will not turn, Self-Clean-ing cycle will not operate

PROBLEM

Control knob(s) will not turn

Self-Clean- ing cycle will not operate

Cooking results are not what you expected

POSSIBLE CAUSE

You are not pushing in before turning.

You have not set the Oven Selector and Oven Temperature Control Knob to CLEAN.

The range clock does not show the correct time of day.

The Lock Lever is not in the CLEAN position-all the way to the right.

The Start Time Dial does not show the correct time of day or the knob is not all the way out.

The Stop Time Dial is not set ahead to the time you want the cleaning cycle to stop.

The range is not level.

The oven temperature seems too low or too high.

You have not preheated the oven as the recipe calls for.

The recipe has never been tested or is not from a reliable source.

The pans are not the type or size recommended in the recipe.

There is not proper air circulation around pan when baking.

The cooking utensils are not the proper shape or do not fit the surface units being used.

SOLUTION

Push control knob(s) in before turning to a setting.

Set both the Oven Selector and Oven Temperature Control Knob to CLEAN.

Reset clock to show the correct time of day. (See page 11.)

Move Lock Lever all the way to the rfght.

Reset the Start Time Knob to show the correct time of day. Pull knob out all the way.

See Step 3 in “Setting the controls” on page 21 for proper setting instructions.

Level range. (See Installation Instruc-

tions.)

Adjust the oven temperature control. (See “Adjusting the oven temperature control” on page 12.)

Preheat oven if called for in recipe.

Use onfy tested recipes from a reliable source.

Refer to a reliable cookbook for rewrn mended pan type and size.

Allow 1% to 2 inches (4-5 cm) on all sides of the pans for air circulation. There must be a minimum space of 1 inch (2.5 cm).

Use cooking utensils with smooth, flat bottoms that fit the surface units being used.

30