Whirlpool RF376PXD warranty Problem, The display is showing “PF”, Cause

PROBLEM

Cooking results are not what you expected (continued)

The display is showing “PF”

“F” followed by a number shows on the display

CAUSE

lThe recipe you are using may need to be altered to improve the taste or appearance of the food.

lYou are using a pan that is not the correct type or size. Refer to a reliable cookbook or recipe for recommended pan type and size.

lThere is not enough air space around pan when baking. Allow 1% to 2 inches (4-5 cm) of air space on all sides of pan. There must be a minimum space of one inch.

lThe cooking utensil is too large or too small for the surface unit being used. Pan should be the same size or slightly laraer than the surface unit beina used.

lThere has been a power failure. Reset the clock. (See page 13.)

l The electronic control or temperature sensor has failed. Call for service. (See Step 2 on page 33.)

If none of these items was causing your problem, see “Requesting Assistance or Service” on page 33.

32