Whirlpool RF377PXG The Anti-Tip Bracket, The Storage Drawer, Removing the storage drawer, Lower

Models: RF378PXG RF377PXG

1 44
Download 44 pages 42.89 Kb
Page 28
Image 28
THE ANTI-TIP BRACKET

USING YOUR RANGE

THE ANTI-TIP BRACKET

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-tip bracket fastened down properly.

wWARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.
See the installation instructions for details.

Failure to follow these instructions can result in death or serious burns to children and adults.

Anti-Tip Bracket

Making sure the anti-tip bracket is installed:

Slide range forward.

Look for the anti-tip bracket securely attached to floor.
Slide range back so rear range foot is under anti-tip bracket.

Range Foot

THE STORAGE DRAWER

Use the storage drawer to store cookware. You can remove the drawer to make it easier to clean under the range.

Removing the storage drawer:

1.Empty the drawer before you remove it. Pull the

drawer straight out to the first stop. (The stops are small, round objects formed in the slide rail. They keep the drawer from sliding all the way out.) Then lift the front of the drawer and pull it out to the second stop.

2.Lift the back of the drawer slightly and slide it all the way out.

Replacing the storage drawer:

1.Position the drawer so that the lower drawer guides rest just inside the front frame lip.

2.Lift the front of the drawer and push it in until the metal stops on the drawer slide rails clear the upper drawer guides. Then slide the drawer closed.

Lower slide rail (inside drawer opening)

 

Drawer

 

slide rail
Upper drawer
Lower
guides
(on inside walls)
drawer guide

28

Page 28
Image 28
Whirlpool RF377PXG The Anti-Tip Bracket, The Storage Drawer, Removing the storage drawer, Replacing the storage drawer