3.Push the Start/Enter pad. The Minute Timer will begin counting down immedi- ately after the timer is started.
When time is up, “End”will show on the large display and you will hear four
NOTE: To disable the reminder tones, push and hold the Timer Set pad for 5 seconds. To reactivate the tones, follow the same procedure.
To cancel the Minute Timer:
l Push the Timer Off pad. The time of day will show on the display.
Using the Off/Cancel pad
The Off/Cancel pad will cancel any function except for the Clock and Timer Set functions. When you push the Off/Cancel pad, the display will show the time of day or, if Minute Timer is also being used, the time remaining.
Audible signals
Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all signals except for the
Push and hold the Stop Time pad for
5 seconds. A short tone will sound to tell you the signals have been changed.
Repeat the above step to turn the signals back on.
To choose between high and low volume signals:
Push and hold the Delay Start Time pad for 5 seconds. A short tone will sound to tell you the signals have been changed. Either “HI”or “LO”will appear on the time display to show the volume you chose.
13