16
Your oven is designed with the AccuBake
temperature management system to constantly
monitor oven temperature. The burner element
will cycle, as needed, to maintain the desired
temperature. This feature is automatically
activated when the oven is in operation.
1. Place the racks where you need them in the oven.
For more information, see the “Positioning racks
and pans” section.
2.Choose the bake setting (optional).
USING YOUR RANGE
Front of rack
Rear of rack

PRESS YOU SEE

BAKE
F
BAKE
After setting a function, you must press the start/
enter pad to start the function. If you
do not press the start/enter pad within
5 seconds of setting, “START?” will
show on the display as a reminder.
STARTING/CANCELING A FUNCTION
The off/cancel pad will cancel any function except for
the clock, timer, or control lock. When you
press the off/cancel pad, the display will
show the time of day or, if the minute timer
is also being used, the time remaining.
START
ENTER
5 SEC
OFF
CANCEL
TONES
Tones tell you if a function is entered correctly or
not. They also tell you when a cycle is completed.
To shut off all tones except for the end-of-timer
and error tones:
Press and hold the stop time pad for 5 seconds.
A short tone will sound to tell you the
tones have been changed. Repeat to turn
the tones back on. You will see “oFF” for
3 seconds when the tones are turned off
and “on” for 3 seconds when they are
turned on.
To choose between high and low volume tones:
Press and hold the delay start time pad for 5 seconds.
A short tone will sound to tell you the tones
have been changed. Either “HI” or “LO” will
appear on the time display for 3 seconds to
show the volume you chose.
DELAY
START
TIME
STOP
TIME
BAKING/ROASTING USING YOUR RANGE