32
To delay the start using delay start time:
1. Press the auto clean pad.
This will automatically set a 31⁄2 hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1⁄2 hour before the cycle is over.
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 31⁄2 hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 21⁄2-41⁄2 hours shows on the display.
•Use 21⁄2 hours for light soil.
•Use 31⁄2-41⁄2 hours for average to heavy soil.
3. Press the delay start time pad.
4. Set the start time.
Press the “up” (s) or “down” (t) pad(s) until the
correct time shows on the display. The oven will
automatically come up with the stop time by
adding the set cleaning time to the set start time.
5. Press the start/enter pad.
SETTING THE CONTROLS (CONT.)USING THE SELF-CLEANING CYCLE
PRESS YOU SEE
AUTO
CLEAN
CLEAN
TIME
HR MIN
START CLEAN
TIME
(example for 2:30 start time)
PRESS YOU SEE
PRESS YOU SEE
START
ENTER
5 SEC
O
N
DELAY CLEAN
PRESS YOU SEE
(example for 41⁄2-hour cycle)
HR MIN
CLEAN
TIME
PRESS YOU SEE
DELAY
START
TIME
START CLEAN
TIME