If you need service or assistance, we suggest you follow these steps: 1. Before calling for
assistance...
Performance problems often result
from little things you can find and fix
yourself without tools of any kind.
If nothing operates:
l
Is the power supply cord plugged
into a live circuit with the proper
voltage? [See Installation
Instructions.)
l
Have you checked your home’s
main fuse or circuit breaker box?
. Have you checked the electric
company for a power failure?
If the microwave oven will not run:
l
Is the oven being used as a timer?
l
If the Temperature Probe is being
used, is it plugged tightly into its
sot ket?
l
Is the door firmly closed and
latched?
l
Did you touch START?
l
Did you follow the directions
exactly?
If the microwave cooking times
seem too long:
Is the electric supply to your home
or wall outlets low or lower than
normal? Your electric company
can tell you if the line voltage is low.
Your electrician or service techni-
cian can tell you if the outlet
voltage is low.
Is the Cook Power at the recom-
mended setting?
Are you allowing for more
time when cooking more food
at one time?
If the Display shows a time counting
down but the oven is not cooking:
l
Is the Minute Timer in use?
l
Is the oven door closed
completely?
l
IS the oven in standing time
between QUICK DEFROST and
COOK CYCLE l? (See page 23.)
If you do not hear a programming
tone:
l
Is the command correct?
l
Has the tone been cancelled?
(See page 8.)
If the fan seems to be running
slower than usual:
l
Has the oven been stored in a cold
area? The fan will run slower until
the oven warms up to normal room
temperature.
If there has been a power interrup-
tion, the Display will show 88:88.
Reset the Clock (see page 9).
If the microwave oven turns off too
soon or not soon enough when
using the Temperature Probe:
Is at least % of the probe in the
food?
Is the probe tip in the center of the
food?
Is the probe touching bone or fat?
Have you allowed roasts to stand
for a few minutes after cooking?
Is the probe plugged tightly into its
sot ket?
Is Cook Power set correctly?
Is the probe temperature set
correctly?
continued on next page