The electronic oven control
Cancel | Display | Set knob |
button | I | \ |
CLEAN ENOIL BAKE
Timer Cl&k Bake siop Clean B;oil Bake
;fn/Jfn button time time button button button button button
Display/clock
l When you first connect the range to power, the display will flash until you set a new time. If, after you set the clock (page
12)the display again flashes, your electric- ity has been off. Reset the clock.
l When you are not uslng the oven, the control is an accurate clock.
l When using the oven or Timer, the display will show the time, temperature settings and what command buttons have been pressed. l When showing the time of day, the display
will show the hour and minutes.
l When using the Timer, the display will show hours, minutes and seconds in the following sequence:
-For settings from
-For settings from
-For settings from 1060 minutes, the display will increase in
Command buttons
The command buttons tell the oven what to do and in what order. A few examples:
the clock.
Each command button (except Cancel) has its own indicator light. An indicator light comes on when you push a command button. Examples: Push the Bake button and BAKE will light up; push the Broil button and BROIL will light up.
Set Knob
Once you’ve pushed a command button to tell the oven what you want it to do, you’ll use the Set Knob to set a temperature or time. Turning the Set Knob clockwise increases the number in the display. Turning the Set Knob counterclockwise decreases the number on the display.
- For settings from l-9 hours 50 min-
utes, the display will increase in 5 min- ute increments and count down each minute.
l When using Bake Time and/or Stop Time,
the display will show hours and minutes. | 11 |
