for youirange
CONTROL PANELS AND KNOBS
1.First make sure knobs are set on OFF then pull knob stralght off.
//
2.Use warm soapy water and a soft cloth to wipe the panel Rinse and wipe dry.
3.Wash knobs rn warm soapy water. Rinse well and dry
4.Push the knobs straight back on Make sure they point to CFF
SURFACE UNITS AND
REFLECTOR BOWLS
REMOVING
1.Be sure surface units are OFF and COOL.
2.Lift the edge of the unit opposite the recep- tacle just enough to clearthe reflector bowl.
Receptacle
3.Pull the surface unit straight away from the
4.Lift out the reflector bowl and trim ring
REPLACING
1.Be sure surface unit controls are OFF.
Receptacle
‘1 Omening /
2.Line UD opening in the reflector bowl and notch in trim ring with the surface unit receptacle.
10