4.To delav start of cleaning, turn the Set Knob until “3:OO”and the CLN and TIME indicators appear on the display. Immediately push the Stop Time button. The blue DELAY, CLN, STOP and TIME indicators will come on. Immediately turn the Set Knob to the new stop time. The red DELAY and CLEAN indicators will come on.

5.After the Self-Cleaning cycle is programmed, the LOCKED indicator will come on. The door cannot be opened when this indicator is on.

6.After the Self-Cleaning cycle is completed, the CLEAN indicator will go off and the time of day will show in the large display.

7.When the oven reaches normal baking/ roasting temperatures, the LOCKED indicator goes off.

8.After the oven is cool, wipe off any residue or ash with a damp cloth. If needed, touch up spots with a soapy steel wool pad.

Special tips

l Keep the kitchen well ventilated during the Self- Cleaning cycle to help get rid of heat, odors and smoke.

l Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual.

lIf the Self-Cleaning cycle does not get the oven as clean as you expected, the cycle may not have been set long enough or you may not have prepared the oven properly. Set the Self- Cleaning cycle longer the next time and hand- clean areas noted on page 19.

To stop the Self-Cleaning cycle at any time: 1, Push the Cancel button.

2.When the LOCKED indicator goes off, you can open the oven door.

21

Page 21
Image 21
Whirlpool SB160PEX manual