USING THE SURFACE BURNERS (CONT.1
In case of a prolonged power failure
You can manually light surface burners. Hold a lit
match near a burner and turn the control knob to
the LIGHT position. After the burner lights, turn the
control knob to the setting you want.
Home canninp information
The large diameter of most water-bath or pressure
canners combined with high heat settings for long
periods of time can cause damage to the cooktop.
To protect your range:
0 For best results, use a canner which can be
centered over the surface burner.
0 Do not place your canner on 2 surface burners at
the same time. Too
much heat will build
up and damage the
cooktop.
0 Start with hot water.
This reduces the time
the control is set on
high. Reduce the heat
setting to the lowest
position needed to
keep the water boiling.
0 Refer to your canner manual for specific instructions.
8