SEALED SURFACE BURNERS AND COOKTOP (CONT.) _---- _ _----_- - _--_---_ ----- _- _ --- _- _-- _____
To clean
the burners:
1.
Pull the burner cap straight up from the 5. After cleaning the gas tube opening and ports,
burner base. replace the burner cap.
2. Clean the burner cap with warm, soapy water To replace the burner
and a sponge. You can also clean it with a cap, make sure the
mildly abrasive scrubbing pad or cleanser. alignment pins on the
Do not clean the burner cap in a dishwasher cap are properly aligned
or self-cleaning oven. with the burner base.
3. If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.
, clean them with a
straight pin. Do not
enlarge or distort the
6.
Turn on the burner to see if it will light. If the
port. Do not use a burner does not light after you have cleaned it,
wooden toothpick. If recheck cap alignment or contact an authorized
the burner needs to be service technician. Do not service the sealed
adjusted, call a qualified burner yourself.
technician for service.
kMOVlNC THE OVEN DOOR For normal use of your range, you do not need to
remove the door. However, if you have to remove
the door follow the instructions in this section.
NOTE: If the door removal pins included in the
Anti-Tip Bracket Package are not available, nails
or screws may be used. Be careful that the length
of the nail or screw does not damage the oven by
chipping or scratching the porcelain surface.
Insert door removal
pin here
y
-...
-- . .
Oven door 1 11
Hinge
hanger
26