Lower Oven Pllot: Remove oven racks and oven bottom. Hold a lighted match to the pilot located at the far end of the oven burner. When pilot is lighted, replace oven bottom and oven racks. Be sure to secure the two screws located at the front of the oven bottom.
nn
HOW TO ADJUST CONSTANT STANDING PILOTS FOR SURFACE BURNERS ONLY
(This information is NOT for ranges equipped with Solid State Ignition.)
1.Remove cooktop and Oven Temperature Control knob. Locate top burner and pilot adjusting screw.
(a)Adjusting screw is to the LEFT of the oven control on the MANIFOLD PIPE for all freestanding ranges without the Programmed Oven Cooking featureor the Griddle/Fifth Burner feature and in the CEN- TER of the MANIFOLD PIPE for the
(b)Adjusting screw is on the UPPER RIGHT SIDE of the oven control for all freestanding ranges with the Programmed Oven Cooking feature but without the Griddle/Fifth Burner feature.
(c)There are two (2) adjusting screws on
ranges equipped with the Griddle/Fifth Burner feature. One screw adjusts the surface burner pilots and the other adjusts the Griddle/Fifth Burner pilot.
Eye Level Oven Pilot: Remove oven racks and oven bot- tom. Hold a lighted match to the pilot located along the left end of the burner. The pilot flame is partially hidden by a metal shield so it may be difficult to actually see the flame.
Replace oven bottom and oven racks. To check oven ignition, turn Oven Temperature Control to a low setting. After a 45 to 60 second delay, the oven burner will ignite if the pilot is lighted.
(1)If range is NOT equipped with the Pro- grammed Oven feature, the two screws are located to the LEFT of the oven control on either side of the griddle valve on the MANI-
FOLD PIPE. >
(2)If a range is equipped with the Programmed Oven feature, the griddle pilot adjusting screw
(A)is located to the LEFT of the griddle valve on the MANIFOLD PIPE and the surface burn- er pilot adjusting screw (B) is located on the UPPER RIGHT SIDE of the oven control.
Insert a small screwdriver into the adjusting screw and turn the screw to the right or left until the flame on the pilot is
I /
CAUTION: DO NOT TURN THE SCREW LOCATED IN THE CENTER OF THE OVEN CONTROL STEM.
Replace cooktopand Oven Temperature Control knob.
3
