The temperature in the oven has been set at the factory. When first usin? the oven. be sure to follow recipe times and temperatures. Then. if you think the oven is too hot or too cool. the temperature control knob can be adjusted. Before adjusting the knob. test ;Lrecipe by using a temperature set higher or lower than the temperature recommended. The baking rexults should help you to decide how much of an adjustment is needed. The hnob can be adjusted in increments of 10°Fas indicated on the back of the knob.
To adjust temperature control on knob back (Figure 1):
1.With the temperature control in the OFF position. pull the knob
2.Loosen the two screws at back of knob. There arc ;I wries of {mall indicator Iines directly opposite the OFF position. One of these indicator lines is positioned next to a tiny pointer. Note the position of the pointer.
3.Adjust temperature accordingly. To increase or decrease temperature. move
the pointer in the direction of”H”or”L” to raise or lower. The knob \vill click into place on each notch as the dial is
4.When the desired adjustment is reached. tighten both
5.To replace knob. line up the fiat sides of both the knob and shaft. Push knob into place.
NOTE: Once an adjustment is made. the OFF position will
Adjusting
Oven
Temperature
Note position of pointer
to marksbefore adjustment
Figure 1
