Before You Call For Service
If you are having an operating problem, check the chart to see what the cause might be before you call for assistance.
OPERATING PROBLEM Nothing operates.
Oven will not operate.
Burner fails to light.
Burner flames are uneven.
Burner flames lift off ports, are yellow, or are noisy when turned off.
Burner makes popping noise when on.
CHECK IF
. Range is properly connected to gas and electrical supplies.
. Your home’s main fuse has blown or circuit breaker has tripped.
. Control knob is set in the correct position.
nThe flow of combustion and /or ventila- tion air to the range is blocked.
. Oven Temp Control is turned to a temperature setting.
. Range is connected to electrical power.
. Your home’s main fuse has blown or circuit breaker has tripped.
. Burner ports are clogged.
. Burner ports are clogged.
. Burner is wet from washing
WHAT TO DO
iContact an authorized RoperSMservice technician to reconnect range to gas and/or electrical supply. (See Installation
Instructions.)
. Replace fuse or reset circuit breaker. In case of prolonged power failure, manually light burners (see page 4).
. Set control knob correctly, if needed.
m Remove blockage to air flow to and around range.
. Turn Oven Temp Control to the desired temperature setting, if needed.
. Contact an authorized RoperSMservice technician to reconnect range to electrical supply. (See Installation Instructions.)
. Replace fuse or reset circuit breaker. In case of prolonged power failure, manually light burners (see page 4).
. Clean with a straight pin (see pages 6 and 8).
. Clean with a straight pin (see pages 6
and 8). If this fails, call an authorized RoperSMservice technician for service.
. Contact an authorized RoperSMservice technician to check air/gas mixture.
lLet dry
Page 10
