Typical surface burner flame at highest setting
3. Lift off the burner caps.
4.Wash the grates and caps with warm, soapy water or in a dish- washer, Use a nonabrasive scrubbing pad for
5.Replace the burner grates and burner caps.
Surface burners
Remove surface burner cover. To remove cover, push in buttons on the sides while lifting the cover.
Wipe off surface burners, cover and burner pan with warm, soapy water and a sponge after each use. Use a plastic scrubbing pad for
If burner ports are clogged, clean with a straight pin. Do not enlarge or distort
the ports. Do not use a toothpick to clean the ports.
Occasionally check the burner flames for proper size and shape as shown. A good flame is blue in color. If flames lift off ports, are yellow, or are noisy when turned off, you may need to clean the burners (see above or “Cleaning tips” on page 34) or call a qualified technician for adjustment.
Replace surface burner cover.
25