CaringForYourRange
l
l
l
Burn, Electrical Shock Fire and
Explosion Hazard Make sure all controls are OFF and the range is cool before cleaning.
Do not use oven cleaners, bleach or rust removers.
Do not obstruct the flow of combustion and ventilation air.
Failure to follow these guidelines could resuit in burns, electrical shock, fire or explosion.
Control panel and knobs
1.Make sure all control knobs are turned to off.
2.Pull control bobs straight off.
3.Use warm, soapy water and a sponge or spray glass cleaner and a paper towel to wipe the control panel. Rinse and wipe dry with a soft cloth.
4.Wash control knobs with warm, soapy water and a sponge. Rinse well and dry with a soft cloth. Do not soak.
5.Replace control knobs by pushing them firmly into place.
NOTE: When cleaning, never use steel wool, abras’wes, or commercial oven cleaners which may damage the finish. After cleaning, make sure all control knobs point to OFF.
Surface burner grates and burner caps
1.Make sure all surface burners are off and the surrounding parts are cool.
2.Lift off the burner grates.
24
