Whirlpool SS373PEX manual If You Need SenAce Or Assistance Continued

If You Need SenAce Or Assistance Continued

tf burner flames are uneven:

l Are burner ports clogged7 See page 25.

H burner flames lii off ports, ara yellow, or are noisy when turned oft:

l The air/gas mixture may be incorrect (Call for service.)

If burner makes a popping noise when ON:

l ‘Is the burner wet from washing? Let dry-

II grill does not cook properly:

lDid you leave space between the food Items?

lWas the grill preheated for the proper amount of time?

lWas food partially frozen or very cold before grilling’? Cooking time will be longer.

If surface burner control knob(e) will not turn:

lDid you push in before trying to turn?

If venting resutts are not what you eXpected:

lIs the exhaust fan turned ON’?

lIs the vent filter clean and in place?

lIs the vent duct or outside opening blocked?

lIs there a draft in the room where the cooktop is installed?

lHas the meat fat been well trimmed? l Has the vent system been installed

according to the Installation Instruc- tions?

ffthe Self-Cleaning cycle will not operate:

lIs the Oven Selector set to CLEAN?

lHave you set a delay start time?

lHave you properly set the time you want the Self-Cleaning cycle to stop?

lIs the Lock Lever all the way to the right?

IIcooking results are not what you expected:

l Is the range level?

l lf needed, have you preheated the oven as the recipe calls foR

lDoes the flame size fii the cooking utensil being used? (See the Cooking Guide.)

l ff broiling, have you completely closed the oven dooR Broiler provides best cooking resuks with the oven door closed.

lAre you following a tested recipe from a reliable source?

l Are you using pans recommended in the Cooking Guide?

lIf baking, have you allowed 1% to

2 inches (4-5 cm) on all sides of the pans for air circulation?

lAre the pans the size called for in the recipe?

l Do the cooking utensils have smooth, flat bottoms and fit the surface burners being used?

If the oven temperature seems too bw or too high:

l Was your old oven accurate? Your old oven may have shifted gradually while your new oven may be more exact

lIf, after using the oven, you are not satisfied with the temperature settings, they can be adjusted by an authorized WhirlpooP service technician. (See ‘lf you need service” on page 39.)

If there has been a power interrup tion, the display will flash ‘12:OO.” Reset the clock, (page 14).

If “call” shows on the display, call for service. (See V you need service” on page 39.)

See the Cooking Guide for more information on cooking problems and how to solve them.

38