Removingand replacing your range
lf the range is removed after installation, you must follow this procedure:
1. Remove storage drawer.
2 Shut off main gas supply valve to
range.
3. Disconnect electrical supply cord.
4. Disconnect downdraft ductwork from fan motor to transition. (See Inetalla- tion Inetructione.)
5. Disconnect the range from the main gas supply lie. Make sure you do Step 2 before disconnecting the gas supply from the range.
6. Slide range forward to disengage range from
7. When reinstalling the range, follow the directions given in the Installation kl.structions.
IfYouNeedServiceOrAssistancel
We suggestyou follow these steps:
1.Before calling for aeeietence -
Performance problems often resufl from file things you can find and fk without tools of any kind.
II nothlng operatee:
lIs the gas turned on?
lIs the power supply cord plugged into a live circuit with the proper voltage? (See Installation Instructions.)
l Have you checked your home’s main fuses or circuit breaker box7
lHave instructions in this book been followed?
lIs the control knob set in the correct position?
lIs the flow of combustion an&or ventilation air to the unit obstructed7
tl the oven will not operate:
lIs the Oven Selector turned to BAKE or BROIL? lf Oven Selector is turned to TIMED BAKE, wait until the start time is reached.
l Is the Oven Temperature Control turned to a temperature setting?
lIs the Cook Timer set correctly?
tf burner faile to light:
lIs the range connected to electrical power?
l Have you checked your home’s main fuses or circuit breaker bofl
l Are burner ports clogged? See page 25.
Do not obstruct airflow to and around unit.
l Recheck suspected defect. | 37 |
