Caring For Your Range
Continued
1. Remove the vent cover and wash in warm, soapy water or wipe with a damp sponge. Do not use metal scrubbing pads or abrasive cleansers.
2. Lift up vent fitter, which is directly below vent cover. Wash in warm, soapy water or dishwasher.
3. Wipe in and around the vent box with a damp sponge. Spills should be cleaned up with a sponge.
4. Replace the fitter. Be sure the fitter is replaced flat and rests on side edges of trim Filter should not be replaced et an angle.
5. Replace the vent cover.
NOTE: filter must be in place for the fan to operate properly. Replacement filters can be ordered from a WhirlpoolW service company or dealer. Order Part Number 786220 (one pair).
In the event you are unable to obtain the name of a local authorized Whirl- pool service company, call Whir@ool Consumer Assistance Center,
28