If your outlet looks like this:

3-wire receptacle (10-30R)

Then choose a 3-wire power supply cord with ring or spade terminals and UL listed strain relief. The 3-wire power supply cord, at least 4 ft (1.22 m) long, must have three 10-gauge copper wires and match a 3-wire receptacle of NEMA Type 10-30R.

If connecting by direct wire:

Power supply cable must match power supply (4-wire or 3-wire) and be:

■Flexible armored cable or nonmetallic sheathed copper cable (with ground wire), protected with flexible metallic conduit. All current-carrying wires must be insulated.

■10-gauge solid copper wire (do not use aluminum).

■At least 5 ft (1.52 m) long.

GROUNDING INSTRUCTIONS

■For a grounded, cord-connected dryer:

This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

This dryer uses a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

■For a permanently connected dryer:

This dryer must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dryer.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug on the power supply cord: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

SAVE THESE INSTRUCTIONS

ElectricalRequirements-CanadaOnly

WARNING

Electrical Shock Hazard

Plug into a grounded 4 prong outlet.

Failure to do so can result in death or electrical shock.

It is your responsibility

■To contact a qualified electrical installer.

■To be sure that the electrical connection is adequate and in conformance with the Canadian Electrical Code, C22.1-latest edition and all local codes. A copy of the above codes standard may be obtained from: Canadian Standards Association, 178 Rexdale Blvd., Toronto, ON M9W 1R3

CANADA.

■To supply the required 4 wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit.

■This dryer is equipped with a CSA International Certified Power Cord intended to be plugged into a standard 14-30R wall receptacle. The cord is 5 ft (1.52 m) in length. Be sure wall receptacle is within reach of dryer’s final location.

4-wire receptacle 14-30R

■Do not use an extension cord.

If you are using a replacement power supply cord, it is recommended that you use Power Supply Cord Replacement Part Number 3394208. For further information, please reference the service numbers located in the “Assistance or Service” section.

GROUNDING INSTRUCTIONS

■For a grounded, cord-connected dryer:

This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

This dryer is equipped with a cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

SAVE THESE INSTRUCTIONS

6

Page 5 Page 7
Page 6
Image 6
Whirlpool W10151492B, W10151493B manual ElectricalRequirements-CanadaOnly, If connecting by direct wire
Page 5 Page 7

W10151493B, W10151492B specifications

The Whirlpool W10151492B and W10151493B are high-performance refrigerator water filters designed to enhance the quality of drinking water and ice while maintaining the overall health and safety standards for your household. These models are compatible with a range of Whirlpool refrigerators and provide an efficient solution for reducing contaminants commonly found in tap water.

One of the main features of the W10151492B and W10151493B is their advanced filtration technology. Employing an activated carbon filtration system, these filters are capable of reducing harmful impurities such as chlorine, lead, mercury, pesticides, and pharmaceuticals. This not only improves the taste and odor of the water but also ensures that it is safe for consumption, making these filters an ideal choice for families looking to consume clean, refreshing water directly from their refrigerator.

Another defining characteristic of these filters is their focus on convenience and user-friendliness. Designed for easy installation and replacement, both models come with clear instructions to ensure that users can effortlessly replace the filter themselves. This eliminates the need for professional installation services, making maintenance simpler and more accessible for the average consumer.

The W10151492B and W10151493B filters also boast a high capacity, with the ability to filter up to approximately 200 gallons of water, depending on water quality and usage. This long-lasting capability aids in reducing the frequency of filter replacements, thus minimizing both cost and environmental impact.

In addition to their functional benefits, these filters are certified by the National Sanitation Foundation (NSF), affirming that they meet stringent public health and safety standards. This certification provides peace of mind to consumers, ensuring that their filtration system is not only effective but also trustworthy.

Moreover, the W10151492B and W10151493B demonstrate an eco-conscious approach; they help reduce reliance on bottled water, contributing to less plastic waste in landfills. Choosing these filters represents a smart choice for environmentally aware households.

In summary, the Whirlpool W10151492B and W10151493B filters stand out with their combination of advanced filtration technology, ease of installation, long-lasting capacity, and certification by NSF. These features work together to provide clean, safe, and great-tasting water, catering to the needs of modern households who prioritize health, convenience, and sustainability.
Top Page Image Contents