Excessive heat around cookware on cooktop

■Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ¹⁄₂" (1.3 cm) outside the cooking area.

Oven will not operate

■Is the power outlet properly wired and polarized?

Try another outlet to check for proper wiring and polarity.

■Is this the first time the oven has been used?

Turn any one of the surface burner knobs on to release air from the gas lines.

■Is the electronic oven control set correctly? See “Electronic Oven Control” section.

■On some models, is the Oven Lockout set? See “Oven Lockout” section.

■Is the main or regulator gas shutoff in the off position? Contact a designated service technician or see the Installation Instructions.

Oven makes muffled ticking noise when in use

■This is normal and occurs when the oven burner cycles on and off to hold the set oven temperature.

Oven burner flames are uneven, yellow, or noisy

■Is propane gas being used?

The appliance may have been converted improperly. Contact a trained repair specialist.

■Is the air/gas mixture correct?

Contact a designated service technician to check the air/gas mixture or see the Installation Instructions.

Oven temperature too high or too low

■Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section.

Display shows messages

■Is the display showing a flashing time?

There has been a power failure. Press CANCEL/OFF to clear the display. Reset the clock, if needed. See “Clock” section.

■Is the display showing “F” followed by a number? Press CANCEL/OFF to clear the display. If an “F” code appears again, contact a trained repair specialist.

Cooktop cooking results not what expected

■Is the proper cookware being used? See “Cookware” section.

■Is the control knob set to the proper heat level? See “Cooktop Controls” section.

Baking results not what expected

■Is the range level?

Level the range. See the Installation Instructions.

■Was the oven preheated?

Wait for oven to preheat before placing food in oven.

■Is the proper oven temperature calibration set? See “Oven Temperature Control” section.

■Is the proper bakeware being used? See “Bakeware” section.

■Are the racks positioned properly?

See “Positioning Racks and Bakeware” section.

■Is there proper air circulation around bakeware? See “Positioning Racks and Bakeware” section.

■Is the batter evenly distributed in the pan? Make sure batter is level in the pan.

■Are baked items too brown on the bottom? Decrease oven temperature 10° F to 30°F (5°C to 15°C).

■Are crust edges browning early?

Use aluminum foil to cover the edge of the crust and/or reduce baking temperature.

Slow baking or roasting

■Was the oven preheated?

Wait for oven to preheat before placing food in oven.

■Is there proper air circulation around bakeware? See “Positioning Racks and Bakeware” section.

■Is the proper length of time being used? Increase baking or roasting time.

■Is the proper temperature set? Increase temperature by 25°F (15°C).

■Has the oven door been opened while cooking?

Oven peeking releases oven heat and can result in longer cooking times.

Broiler burner fails to light

■Is the ignition system broken?

Contact a designated service technician to replace it.

■Has a household fuse been blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

13

Page 12 Page 14
Page 13
Image 13
Whirlpool W10200947A manual Excessive heat around cookware on cooktop, Oven will not operate, Display shows messages
Page 12 Page 14

W10200947A specifications

The Whirlpool W10200947A is a high-quality, versatile water filter designed to enhance the performance and longevity of your refrigerator. Known for its excellent filtration capabilities, this filter is engineered to remove impurities, ensuring that the water and ice produced by your refrigerator are clean and safe for consumption.

One of the main features of the W10200947A is its ability to remove contaminants such as chlorine, lead, sediment, and other harmful substances from your water supply. This filter utilizes advanced carbon block technology, which has been proven effective in adsorbing a wide range of contaminants, thereby improving the taste and quality of your water and ice.

Additionally, the W10200947A filter has a long lifespan, typically lasting up to 6 months or 200 gallons, depending on your household’s water usage. This longevity means fewer filter replacements and reduced maintenance efforts, providing more convenience for busy households. The filter's simple clip-in design allows for easy installation and replacement without the need for professional assistance or tools, making it user-friendly for everyone.

Another key characteristic of the Whirlpool W10200947A is its NSF certification. This certification ensures that the filter has met stringent industry standards for safety and efficacy, giving consumers peace of mind regarding its performance and reliability. The filter is designed to fit various Whirlpool, Maytag, Amana, and KitchenAid refrigerators, adding to its versatility.

The W10200947A is also notable for its low water flow rate, ensuring that you receive a consistent supply of fresh water without significant pressure drops. This characteristic makes it an excellent choice for households where multiple appliances may be drawing on the water supply simultaneously.

Overall, the Whirlpool W10200947A water filter combines effective filtration, ease of use, and long-lasting performance, making it a top choice for families concerned about the quality of their drinking water. By investing in this filter, you are not only enhancing the taste of your beverages but also making a commitment to healthier living for you and your loved ones.
Top Page Image Contents