Whirlpool W10203506A Make Electrical Connection, For Double Ovens, For Single Ovens

Make Electrical Connection

For Double Ovens

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

For Single Ovens

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 12 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

Make Electrical Connection

This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together.

1.Disconnect power.

2.Feed the flexible conduit from the oven through the opening in the cabinet.

3.Remove junction box cover, if it is present.

4.Install a UL listed or CSA approved conduit connector to the junction box.

A

Electrical Connection Options Chart

If your home has:	Go to section:
4-wire	4-wire Cable from Home
	Power Supply
	½"
	(1.3 cm)
3-wire	3-wire Cable from Home
	Power Supply

A. UL listed or CSA approved conduit connector	½"
	(1.3 cm)

5.Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector.

6.Tighten screws on conduit connector.

7.See “Electrical Connection Options Chart” to complete installation for your type of electrical connection.

5