Whirlpool W10632883A installation instructions Door Removal, Leveling and Alignment, Base Grille

Door Removal, Leveling and Alignment

Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference. IMPORTANT: The graphics on this page are for models with the ice storage bin on the door. On models with the ice storage bin inside the freezer, the wiring and water dispenser tubing configurations are simpler than what is shown in these graphics. Please read all instructions on the next few pages for more information.

NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the refrigerator and freezer doors. If door removal is necessary, see the instructions below.

IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

3	Wiring Connection				4	Top Left Hinge	5	Door Removal	6	Top Right Hinge
						A
										A
						A
					A. Do Not Remove Screws.						A
A	B	C D	E	F					A. Do Not Remove Screws.
A. P-clamp		D. Wiring Clip
B. Routing		E. Grommets
Plate		F. Wiring							7	Bottom Hinges
C. Electrical		Plugs
Housing										(Left and Right)
2A Water Dispenser
	Tubing Connection
	(Style 1)
									8	Leveling
											A
											B
	A
									Raise		Lower
										C
		A								A. Bottom Hinge
										B. Leveler Bracket
	A. Face of Fitting
										C. Leveling Foot
2B Water Dispenser Tubing
	Connection (Style 2)								9	Door Alignment
										(Bottom Right Hinge)
							1	Base Grille
										A	Raise
								Doors must be		Lower
										A. Alignment Screw
								open to 90˚
4