WhisperKool 2500 Control Panel Features And Operation, Button, Normal Functions, On/Off, Up and

CONTROL PANEL FEATURES AND OPERATION

Button	Normal Functions
ON/OFF	• The ON/OFF button allows the customer the convenience of turning the refrigeration sys-
	tem ON or OFF, from the control panel. This feature does not disconnect power from the
	unit, and the condenser fan will continue to run in the OFF position. In order for the power
	to be shut off from the unit, the power cord must be unplugged from the wall receptacle.
	• Press the ON/OFF button once for button application.
Up and	• Use these buttons to scroll up or down the CPSM menu.
	• Displays the Highest and Lowest temperature sensed by the Bottle Probe. This feature
Down
	allows the customer instant access to the recorded data applicable to the Bottle Probe Tem-
Arrows
	peratures, it can be easily reset to reflect current temperatures.
	1. Press the “UP” arrow, or the “Down” arrow once, and the Highest or Lowest Temperature
	(Hi/Lo) sensed by the Bottle Probe, will be displayed.
	2. To reset the Hi/Lo, press and hold the “Set” button when the Hi/Lo value is displayed on
	the Digital Display, continue to hold the “Set” button until “rst” appears on the digital
	display and then blinks. This will erase the past recorded “Temperature Data History”
	and start recording, from the current time and temperature, forward. Temperatures
	displayed would reflect Bottle Probe Temperatures from that point in time, and beyond.
	3. The Hi/Lo feature should be reset at initial “Start-Up” and after the Cellar or Cabinet has
	obtained normal operating temperatures, which is generally 55°F.
Cellar	• The CPC Feature is activated by pressing the Up button for 3-5 seconds, and the CPC logo
	will be displayed on the digital display. The CPC feature can be terminated by pressing the
PreChill
	Up button for 3-5 seconds, or the feature will self terminate after 6 hrs.
(CPC)
	1. The (CPC) Feature may be used to Pre-Chill the Cellar prior to loading it with Warm Prod-
	uct. The feature will shift the Set Point down to a lower setting of 52°F, for the next 6
	hours. After the 6 hour time period, the Set Point will automatically return to the original
	Set Point.
	2. The CPC feature can be conveniently adjusted to the customer’s specific needs, by access-
	ing the “Customer Preference Select Mode” (CPSM). See Customer Preference Select Mode
	Instructions.
	Note: This feature is not available on the Remote Key Pad application.

Page 15