WhisperKool PLATINUM 4000, PLATINUM 8000 Installation Options, Exterior Grille Installation

INSTALLATION OPTIONS

Exterior Grille Installation

The exterior grille is required on all installations where the condenser side of the unit is exposed to the outside of the dwelling (i.e. rain and weather).

The Condenser Grille must be removed.

STEP 1:

Locate the screws at the bottom of the grille and remove. Using medium force, push the grille upward and lift the grille away from the unit.

STEP 2:

Remove Filter from Condenser Grille and place inside the Exterior Grille to protect the coils.

STEP 3:

Now determine at what depth the unit will be installed:

• For a non-flush installation (i.e. holes location #1 WhisperKOOL retrofit or #2 Middle Wall), place the grille on the condenser end and line up the holes on the grille with the holes on unit location #3. Use the 10 self tapping screws provided to fasten the grille to the unit.

•For a flush installation, place the grille on the condenser side and then place the mounting bracket over the grille sides, “stacking” them. Align the holes and fasten with the 10 self-tapping screws provided.

* It is required to use self tapping screws provided. Do not drill screws into unit.

Non-Flush Installation	Flush Installation
Page 18	PT-EXPL 020111