ENTERING YOUR PROGRAM
Follow these steps to enter the heating/cooling program you have selected.
NOTE
We recommend that you remove the thermostat from the wall for programming (especially for entering cooling programming). A fresh 9 volt Energizer® alkaline battery must be installed to
perform | SYSTEM | TO |
HEAT - OFF - COOL - AUTO |
TURN THE THERMOSTAT OFF BEFORE RE- ATTACHING THE THERMOSTAT TO THE SUBBASE!
You cannot program the thermostat with the SYSTEM SWITCH in the AUTO position.
Set Current Time and Day
1. Press SET once. The display will show
CLOCK
minutes only.
EXAMPLE:
2. Press and hold either TIMEFWD or BACKTIME until you reach the correct minutes.
3. Press SET once. The display window will
CLOCK
show the hour only.
EXAMPLE:
4. Press and hold either TIMEFWD or BACKTIME until you reach the correct hour and AM/PM desig- nation (AM begins at midnight; PM begins at noon).
24
