Program Cooling Temperatures
!CAUTION
If outside temperature is below 50°F, we recommend that you remove the thermo- stat from the wall before proceeding with the following steps to program cooling temperatures. Personal injury or prop- erty damage may occur due to air condi- tioner compressor slugging. A fresh 9 volt Energizer® alkaline battery must be installed to perform
operation. USE | SYSTEM | TO TURN SYS- |
HEAT - OFF - COOL - AUTO |
TEM OFF BEFORE REATTACHING THERMOSTAT TO SUBBASE!
1.To program cooling temperatures for the heating/cooling periods you have already
set, press | SYSTEM | until COOL is displayed. |
HEAT - OFF - COOL - AUTO |
2. Press VIEW once. The Monday heating/
PRGM
cooling period 1 start time you just pro- grammed will appear, and the currently pro- grammed cooling temperature (A or B) will be displayed.
3.Press or to display the COOL A or COOL B temperature you want for Monday’s heating/cooling period 1.
4.Press PRGMVIEW , then select Monday’s COOL A or COOL B temperature for period 2.
5.Repeat steps 3 and 4 for Monday’s heating/ cooling periods 3 and 4.
29