program, when you press HOLDCOPY , COPY 3 will appear in the display (as shown below).
EXAMPLE: 
4. Press ADV to select the day you want to
DAY
copy the program TO.
5.Press HOLDCOPY . COPY will disappear from the display, and the display will show the copied heating/cooling time and temperature for the day you copied TO.
6.Repeat the above steps to copy any day’s programming into any other day’s program.
7.Press PRGMRUN to begin program operation.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one final time before beginning thermostat operation.
1. Press | SYSTEM | until HEAT is displayed. |
HEAT - OFF - COOL - AUTO |
2.Press and hold PRGMVIEW to view the heating/ cooling period times and heating tempera- tures for Monday.
3.Press ADVDAY once to advance to Tuesday.
4.Press and hold PRGMVIEW to view heating/cool- ing periods and heating temperatures for Tuesday.
5.Repeat steps 3 and 4 to review all remaining days’ programming. If you find an error in any day’s programming, go back to the
31
